Biansi Elife 900mah Kit in Stock!

Product Code: Biansi

29,99 €
Colour*


Biansi Elife 900mah Kit in Stock! Summary

The Biansi Elife brings a revolutionary new design to tank type atomizers.
Based on the original Imist design, the Elife is the first of its kind where the
atomizer coil assembly can be removed, cleaned and/or replaced as an
isolated unit. You no longer need to stock up on spare replacement atomizers.

The low resistance on the atomizer coil (2.0 Ohms) produces a warmer vapor
and great throat hit. The 900mAh battery in this kit will provide approximately
7+ hours of usage between charges, depending on how much you vape.

Each Kit contains:

  • 1 - Elife 900 mAh Lithium Rechargeable Battery
  • 1 - Elife Atomizer w/ Coil Assembly
  • 1 - Cartridge Carrying Case
  • 4 - Blank Elife Tank Cartridges
  • 1 - USB Charging cable
  • 1 - Instruction Manual

Specifications

  • Length: 14X138mm
  • Weight: 46g
  • Battery: 900mAh
  • Normal working voltage: 3.3-4.2V
  • Life between charges: 6-11 hours or more (depending on usage)
  • Cartridge size: 1.1ml
  • Atomizer ohms: 2.0
  • Charge time: 1.5 - 2 hours
  • Battery life: 300+ charge cycles

Please note: The BIANSI Elife battery is not compatible with Imist or Imist 2
                      Atomizer devices without using an adapter.

How to clean the Biansi Elife atomizer.

When residue build-up becomes visibly noticeable on the heating coils, there is a
noticeable difference in taste or the vapor production weakens, it is time to clean
the atomizer coil. This will usually be every 2-3 days depending on the thickness
of the vapor liquid being used. Clean the atomizer coil with USP grade isopropyl
alcohol. If you notice residue on the heating coils, use a toothpick, tweezers or soft
bristle tooth brush to remove it.

NOTE: Do not damage or deform the coils of the atomizer core. Damaging or deforming
the coil may cause a break or short which would permanently damage your atomizer core
as well as possibly damage the battery.

How to change the Biansi Elife Wick.

Using some tweezers, grab the fiber lines all together and pull out the wick. Now
grab the new wick by the fibers, and push into the atomizer wick hole. If you can
pull out the wick fibers after placement, you have not put it in properly.

You can regularly clean your wick with warm water. When you notice it does not
come clean, that is when you can replace it.

Recently Viewed Products

Pay with PaypalPay by other