This is a genuine BIANSI Elife Atomizer - It brings a revolutionary new design to
tank type atomizers. Based on the original Imist Atomizer design, the Elife Atomizer
is the first of its kind where the atomizer coil/core assembly can be removed, cleaned
and/or replaced as an isolated unit. You no longer need to stock up on spare replacement
The low resistance on the atomizer coil (2.0 Ohms) produces a warmer vapour and great
throat hit. The atomizer has improved on the Imist design which improves the wicking
system and increased vapour production.
Each ELife Atomizer Assembly comes with the following components:
- Atomizer Base Assembly
- Atomizer Coil/Core
- Atomizer Top Assembly
- Biansi Wick
- Biansi Tank
How to clean the Biansi Elife atomizer?
When residue build-up becomes visibly noticeable on the heating coil, there is a
noticeable difference in taste or the vapour production weakens, it is time to
clean the atomizer coil. This will usually be every few days or once per week
depending on the consistency of the vapour liquid being used. Clean the
atomizer coil with (USP) isopropyl alcohol / Flavour Flush. If you notice
residue on the heating coils, use a soft bristle tooth brush to GENTLY
and CAREFULLY remove it.
NOTE: Do not damage or deform the coils of the atomizer core. Damaging or deforming
the coil may cause a break or short which would permanently damage your atomizer
core as well as possibly damage the battery.
Dry the atomizer Coil completely before assembling and using the device.
How to change the Biansi Elife Wick?
Using some tweezers, grab the fiber lines all together and pull out the wick.
Now grab the new wick by the fibers, and push into the atomizer wick hole.
If you can pull out the wick fibers after placement, you have not put it in properly.
The Biansi Elife Atomizer is not compatible with the Imist
or Imist 2 batteries without using an adapter.