Joyetech eGrip Airflow Adjustable VW Kit -1500mAh is the first built-in atomizer e-cigarette from Joyetech.
It features not only a transparent liquid window but also a 360-degree regulation ring to adjust output
wattage(8W-20W) and airflow adjustable screw.
Size: 46.4mm X 20.4mm X 99.5mm(including mouthpiece)
Output mode: VW Mode
E-juice Capacity: 3.6ml
eGrip CS Atomizer Head: 1.5Ω resistance
Colors: black, camo, silver
The kit comes with
- 1× eGrip Mouthpiece
- 1× eGrip box MOD
- 2× eGrip CS Atomizer Head
- 1× eGrip Atomizer Base
- 1× USB Cable
- 1× Manual & Warranty Card
1. Power: 20W voltage regulation (from 8W to 20W)
2. Transparent window, convenient filling
3. Air inlet regulation
4. Incomparable design: integration of atomizer and battery
5. All-metal surface, compact, exquisite and portable
6. Replaceable special eGrip CS Atomizer Head (1.5ohm)
Output wattage adjustment
In this VW mode, wattage output can be adjusted by rotating the regulation ring clockwise or counter clockwise.
With the wattage increasing, the vapor speed will be faster and you can enjoy a huger vapor.
Air inlet regulation
Spin the adjustable screw on the side of the bottom.
The looser the screw is, the bigger the air inlet is.
Push up the lid on the side of eGrip body, then slowly refill the liquids into the hole.
And do remember to lock the cap after finishing filling.
Atomizer Head replacement:
Unscrew the big screw at the bottom with a coin, and the atomizer head is located on the base of it. Simply unscrew the atomizer head and replace a new one.
Plug the USB cable to the eGrip body from the bottom, and connect it to the wall adaptor or other power source such as a computer. (it can be used whilst on charge)