Joyetech eMode Starter Kit boasts a newly designed atomizer head, which is the second generation of Joyetech atomizer heads. The 360-degree regulation makes it possible for users to adjust the voltage and wattage output. eMode also offers a variable output which changes as you puff. In addition, eMode allows you to access information about your vaping habits by connecting with MVR software.Spec:
Length xDiameter: 121mm x 18mm
Wattage:4.5W-11W eMode atomizer
Length x Diameter: 66mm x 18mm
Capacity: 3ml It comes with:
- 2 x eMode Mouthpiece
- 1 x eMode Atomizer
- 1 x eMode C2 Atomizer Head (2.4ohm)
- 1 x eMode Control Head
- 1 x eMode Power Supply (16650 Li-battery)
- 1x eMode tube
- 1 x USB Cable
- 1 x Wall Adaptor
- 1 x eMode Manual
1.More vapor by using new atomizer head, the second generation of Joyetech atomizer head.
2.Adjustable air inflow
3.Four power modes: VV,VW,RVV and RVW (RVW1,RVW2,RVW3)
4.Compatible with MVR software
to turn the battery on or off, please click the button 5 times in quick succession.
The button light will flash when it's turned on or off. Air inflow adjustment:
From the air inlet valve on the eMode atomizer, you can regulate the air inflow by
using a straight screwdriver or a cross screwdriver to set your favorite vaping draw.
When the inlet is turned upward, it will deliver the least amount of air, and the draw will be less airy, just
like the eGo-T and eGo-C.
When the inlet is turned downward, it will deliver the most amount of air, and the draw will be more airy,
like the eGo-CC.
When the inlet is turned to the middle (either the right or the left), it will deliver a medium amount of air.
While in VV or VW mode, rotate the 360-degree regulation ring on the control head
either clockwise or counter clockwise to select the appropriate power output. (note: if the battery is detached
and when you estart the emode, you have to rotate the regulation ring for a revolution to reset operation.)Mode selection:
Long press (press and hold) the button to enter circular selection state and loosen the button
to select the mode. There are 4 indicator lights to indicate the four modes.
If the button is held down for longer than 10 seconds while releasing vapor, after button light flashing 10 times and the device will automatically disable use of the atomizer to protect against possible damage.
Unscrew the eMode atomizer top cap and you will see two inlets on the atomizer.
Simply pour the e-juice into the atomizer inlets.
Atomizer head change:
Unscrew the entire eMode Body, and locate the Atomizer Head assembled #
on the eMode Base. Simply unscrew the Atomizer Head and replace it with a new one.
- No e-liquid included.
- Please screw on the top to avoid leakage.
- There is CE mark on the end of battery cap.