KANGER SUBTANK

Product Code: Kanger-Sub

29,99 €
Add OCC coils*


KANGER SUBTANK Summary

Kangertech Subtank Hybrid Tank


The Subtank is a brand new revolutionary tank from Kangertech, that can be
used as a clearomizer as well as an RBA. The Subtank provides you with the
option of using this tank as an RBA or with and the new OCC (Organic Cotton Coil)
coils, the newest innovation. The Organic Cotton Coils are made with Japanese
Cotton, have a unique square shape and are said to have a longer life span,
a larger heating section, and a purer taste!


This feature packed device comes fully equipped with a new adjustable airflow
control, a sturdy glass tank and a spring loaded 510 connection. The Subtank
gives you the choice of using the pre-installed OCC coils or the new Kanger
RBA coil head if you prefer building your own coils. If you want to enhance
your vaping experience, the Kanger Subtank is perfect for you.



Features and Specs:

  • Dimensions: 2-1/4"L x 1"D(without drip tip)
  • Spring-loaded 510 connector
  • Glass Tank
  • Base hardware: stainless steel
  • New adjustable airflow control for superior airflow
  • New Organic Cotton Coil Head
  • Organic Cotton made in Japan
  • Choose between RBA or OCC
  • OCC holds 6 mL of liquid
  • RBA holds 4.2 mL of liquid
  • 510 Drip tip compatible

Package Contents:
  • 1 x Kangertech SUBTANK
  • 1 x OCC: 0.5 Sub Ohm / Range 15 - 30 W
  • 1 x OCC: 1.2 Ohm / Range 12 - 25 W
  • 4 x RBA Coil (Organic Cotton made in Japan)
  • 1 x RBA Tip Connector
  • 1 x RBA Base
  • 1 x Tool Kit (screwdriver,screws)
  • 1x - Beauty Ring (From Φ25 to Φ22mm)

Warning: This tank uses a sub-ohm resistance atomizer. It will only work on a
mechanical mod or a mod capable of 30 watt or higher. You must be sure that
your mod AND batteries can handle SUB OHM coils. If you're using an electronic
mod, make sure it can handle the amps. For mechanical mod users, please use
30 Amp batteries or higher. Use the OHMS LAW CALCULATOR, CHECK YOUR
AMPS, and be safe! 

Tips:

  • The metal tube in the center of this Clearomizer leads from the mouthpiece to the battery end. Avoid getting liquid in this tube when filling the Clearomizer.
  • When unfastening the base (atomizer head) to refill the Clearomizer, the seals are temporarily broken and liquid will leak from the mouthpiece or escape into the center tube. Always wrap a cloth or piece of tissue around the mouthpiece when unfastening the base of the Clearomizer.
  • Gurgling noise or leaks: This is a sign that liquid has found its way into the metal tube in the center of the Clearomizer (and usually occurs after a refill). Ridding the center tube of liquid will resolve the issue. To do so without emptying the tank, remove the Clearomizer from the battery, wrap a cloth or tissue around the battery end of the Clearomizer and blow through the mouthpiece.
  • The atomizer head ocan unfasten when unscrewing the tube or base. Always secure the atomizer head before reinstalling the base.
  • It is normal to find a small amount of liquid in the battery contact area when removing the Clearomizer or any atomizer. We recommend cleaning the battery before charging it.
  • When possible, keep the tank full and never below 1/3 full of eLiquid ("topped off"). This helps maintain the "vacuum" in the tank and prevent leaks.
  • When the atomizer head wears down, it may begin to leak. Replace the atomizer head with a new one if available.

Recently Viewed Products

Pay with PaypalPay by other