JoyeTech
JoyeTech
Joyetech EN Mesh CoilThe Joyetech EN Replacement Coil is compatible with the EVIO Kit/Joyetech EVIO C Pod/Joyetech EVIO Box Pod Kit. The Joyetech EN Coil is a meshed coil with 0.8/1.2ohm resistance. Spec: Quantity: 5pcs/pack Coil: 0.8ohm Mesh Coil It comes with 1 x Joyetech EN Coil for EVIO C
JoyeTech
Joyetech Exceed Grip Starter Kit 1000mAh - Non EU only!Joyetech Exceed Grip Starter Kit is an upgraded version from Joyetech Exceed with dual colorful IML panels and creative side-way cartridge. Working with inbuilt 1000mAh battery, the mod is durable and a stable vaping experience with 20W max output. Joyetech Exceed Grip also can offer intelligent variable voltage output. Plus the advanced and innovative dry burning protection (DBP) technology, the Exceed Grip is safe to use and brings you incredible flavor. Joyetech Exceed Grip Starter Kit has a 4.5ml cartridge with a pre-installed 0.4ohm EX-M coil and a 3.5ml pod cartridge with an integrate 0.8ohm mesh coil. In short, the Joyetech Exceed Grip Kit is definitely an advanced pod system kit in vape market. Spec: Size: 40 x 21 x 74mm Cartridge: 4.5ml/2ml, EX-M 0.4ohm coil (changeable) Pod Cartridge: 3.5ml, 0.8ohm integrate mesh coil (fixed) Battery Capacity: built-in 1000mAh Output Mode: variable voltage output Output Wattage: max 20W Features: 1000mAh inbuilt battery Dual colorful IML p...
JoyeTech
Joyetech ProC Head for ProCore SeriesThe Joyetech ProC series Heads are designed for ProCore Series atomizer. It supports various power and brings intense flavor and vapor production. 5pcs each pack. Spec: ProCA DL: 0.4ohm (55 - 65W) It comes with 1 x Joyetech ProC Head for ProCore Series Tank 5pcs
JoyeTech
Joyetech LVC Clapton MTL Head for CUBIS/CUBIS Pro/eGO AIOJoyetech LVC Clapton MTL Head for CUBIS/CUBIS Pro/eGO AIO Joye LVC Clapton head applies the liquid valve control system. Simply rotate the ring on the base to adjust the valve. With 1.5ohm resistance, you can enjoy the MTL vaping experience. Spec Resistance: 1.5ohm LVC (Liquid Valve Control) It comes with 1 x 5pcs Joyetech LVC Clapton MTL Head How to change atomizer head: Unscrew the atomizer cap, the atomizer head is located on the cap. Just unscrew it and replace a new one. Note: 1. Please don't wash the atomizer head with water. Simply scrub it with cotton or clean dry cloth. 2. Please drip at least 5 drops of e-juice to the atomizer head and vape a few times in power-off condition (with airflow widely open) before its first use to avoid dry burn. It can be used with Cubis Atomizer, Cubis pro Atomizer and Ego Aio
JoyeTech
Joyetech EX Coil Head for ExceedThe Joye EX coil is designed for Exceed series atomizers. The 1.2ohm coil is for MTL vaping under 8 - 15W, while the gold-plated 0.5ohm coil is for DL vaping under 20 - 35W. Spec: Coil: EX 1.2ohm MTL head (8 - 15W); EX 0.5ohm DL head (20 - 35W) Info: It's for Exceed D22 Tank / Exceed D19 Tank /Exceed D22C Tank Please drip a few drops e-liquid into the head and inhale a few times in power-off condition before its first use to avoid dry burn. Please don't wash the head with water. Simply scrub it with cotton or clean dry cloth.
JoyeTech
Joyetech ProC-BF/BFL Head for CuAIO/CUBIS 2The Joyetech ProC Replacement Coil Head will provide an ultra vaping experience for mouth-to-lung vapers. It is compatible with CUBIS 2 atomizer, CuAIO D22 Kit and CuBox AIO kit. Spec: Resistance: 0.6ohm It comes with 1 x Joyetech ProC Series Replacement Coil Head Info: It's for CuAIO Kit, CUBIS 2, CuBox Kit, CuBox AIO kit... Please first drip a few drops of e-liquid directly into the coil to make it fully saturated before first use Please don't vape until e-liquid nearly runs out. Otherwise, the coil inside will be damaged.
JoyeTech
Joyetech Spiral Mouthpiece for eGo AIOSpiral mouthpiece for the Joyetech eGo AIO One piece included. Color: Black, Grey, Pure, White
JoyeTech
Joyetech BF-Ni Coil for CUBIS/ eGO AIO/ Cuboid MiniJoyetech BF Replacement Coil for CUBIS/ eGO AIO/ Cuboid Mini is made of totally imported SS316, supporting dual modes. Features: 1. Made of imported SS316. 2. Bottom Feeding series coils 3. It's applied to atomizer to go with not only TEMP SS mode, VW mode, VT mode but also TCR mode. Guide: 1. With the bottom hardware removed from the tank system, simply screw your replacement coil into the atomizer. 2. Suggested settings:
JoyeTech
Joyetech BF Clapton Coil for CUBIS/ eGO AIO/ Cuboid MiniJoyetech BF Replacement Coil for CUBIS/ eGO AIO/ Cuboid Mini is made of totally imported SS316, supporting dual modes. BF Clapton-1 .5ohm (8-20W) Features: 1. Made of imported SS316. 2. Bottom Feeding series coils 3. It's applied to atomizer to go with not only TEMP SS mode, VW mode, VT mode but also TCR mode. Guide: 1. With the bottom hardware removed from the tank system, simply screw your replacement coil into the atomizer. 2. Suggested settings:
JoyeTech
Joyetech ProC Head for ProCore AriesThe Joyetech ProC series Heads are designed for ProCore Aries atomizer. It supports various power and brings intense flavor and vapor production. Parameters ProC4 DL: 0.15ohm (50 - 110W) ProC3 DL: 0.2ohm (40 - 130W) ProC2 DL: 0.15ohm (30 - 70W) ProC1-S MTL: 0.25ohm (25 - 55W) ProC1 DL: 0.4ohm (40 - 80W)
JoyeTech
Joyetech eGrip CS HeadeGrip CS head has an entirely different construction. It's resistance is 1.5Ω, which can work under high voltage and wattage. Parameters resistance value: 1.5ohm (support 3.5V to 5.5V) Guide: Atomizer Head replacement: Unscrew the big screw at the bottom with a coin, and the atomizer head is located on the base of it. Simply unscrew the Atomizer head and replace a new one. Only suitable for Joyetech eGrip box MOD.
JoyeTech
Silicone Cover for Joyetech eGo AIOSilicone Cover for Joyetech eGo AIO , is made of high-quality silicone. Parameters Material: Silicone Rubber Quantity: 1 pc It comes with 1 x Silicone Cover for Joyetech eGo AIO
JoyeTech
Joyetech BF Replacement Coil for CUBIS/ eGO AIO/ Cuboid MiniJoyetech BF Replacement Coil for CUBIS/ eGO AIO/ Cuboid Mini is made of totally imported SS316, supporting dual modes. Parameters BF SS316-0.6ohm (15 -28W) Features: 1. Made of imported SS316. 2. Bottom Feeding series coils 3. It's applied to atomizer to go with not only TEMP SS mode, VW mode, VT mode but also TCR mode. Guide: 1. With the bottom hardware removed from the tank system, simply screw your replacement coil in atomizer. 2. Suggested settings: Tips: It works with Joyetech Cubis Tank and Cuboid Mini Atomizer. 0.6ohm and 1ohm coils can be used with Joyetech eGo AIO Please soak the new coil before using.
JoyeTech
Joyetech eGo One CLR VT Atomizer Ti HeadJoyetech eGo One CLR VT Atomizer Ti head, is the temperature control head for eGo One CL VT atomizers. Ti CLR 0.5ohm resistance available. Parameters Resistance: Ti CLR 0.5ohm Coil change: Screw the VT atomizer head onto the VT atomizer base along the clockwise. Screw the base onto the VT atomizer tube along the counter clockwise. Plug on the replaceable mouthpiece It only work with Joyetech eVT atomizer or Joyetech eGo one series.
JoyeTech
Joyetech CL Pure Cotton HeadJoyetech CL Pure Cotton Head, is newly added pure cotton heads for eGo One series atomizers. They are made of pure cotton, which brings you a totally pure flavor. CL 0.5ohm head and CL 1.0ohm head are available. Parameters Resistance: CL 0.5ohm, CL 1ohm It works with Joyetech eGo one series atomizers.
JoyeTech
Joyetech eGo ONE Atomizer HeadThe Joyetech eGo ONE Atomizer Head is introduced with unique design. Parameters Resistance Value: 0.5ohm & 1.0ohm Working Wattage (0.5ohm) : 20-35W Working Wattage(1.0ohm): 10-20W Features 0.5ohm & 1.0ohm resistance How to replace 1. Unscrew the atomizer base from the atomizer tube. 2. Simply twist the atomizer head clockwise and pull it out. 3. Insert a new one and twist it counter-clockwise to lock it into the slot.
JoyeTech
Joyetech eGo One CLR Atomizer HeadJoyetech eGo One CLR Atomizer Head is the specially designed atomizer head for Joyetech eGo One. With CLR head, youre able to rebuild it without performance diminishing. Parameters Height: 18mm Diameter: 10mm Pre-made coil resistance: 1.0ohm, 0.5ohm Pre-made coil diameter: 0.4mm Suggested coil resistance: more than 0.3ohm Features High quality Operation Steps 1.Prepare the heating wire. Standard heating wire for example. Take a piece of heating wire of around 60millimeters long and roll the heating wire; Reserve around 8.5mm on one side, and then rotate 5 - 6 circles reserving around 7mm on the other side. Bend a little at bot ends. 2.Install the regulating ring to the atomizer tube and screw it tightly. This ring could adjust the amount of liquid entering. 3.Put the heating wire into the tube, and keep it in the center position. 4.Put the long end into notch, pass the short end through the insulating ring. 5.Install the insulating ring and connection base to the tube...
JoyeTech
Joyetech Delta II LVC Atomizer HeadsJoyetech Delta 2 LVC Head is the new generation of Joyetech atomizer head. It uses new and advanced technology to deliver more vapor, compatible with Delta atomizers. Parameters Resistance value: 0.5ohm working voltage: 3.3V - 5.5V Features 0.5ohm resistance Dual coil How to replace 1. Unscrew the atomizer base from the atomizer tube. 2. Simply twist the atomizer head clockwise and pull it out. 3. Insert a new one and twist it counter-clockwise to lock it into the slot.
JoyeTech
Joyetech CL-Ni Nickel Atomizer HeadsJoyetech CL-Ni Nickel Atomizer Heads The CL-Ni atomizer head is designed for use in the Joyetech eVic-VT e-cigarette mod. The coil can also be used with many mechanical mods, fixed voltage and Variable Voltage devices if they are capable of working with coils down to 0.2Ω atomizer resistance. This atomizer head has an improved resistance/ohm accuracy of 0.2Ω+-0.01Ω through use of a gold plated connector. Our CL Nickel Coil is built using 100% natural cotton for the ultimate vapour production. Note: Due to the change in coil resistance with temperature, the power produced by the atomizer head will reduce as the coil temperature increases. This means that while the CL-Ni atomizer head will work successfully with many Variable Wattage devices, the power displayed on the device will not generally reflect the actual power delivered to the atomizer.
JoyeTech
JOYETECH EVIC VT FULL KIT in stock! - Non EU only!Package Contents: 1 x eVic-VT 1 x eGo ONE Mega Tank (with CL-Ni 0.2ohm head) 1 x CL-Ti head (0.4ohm) 1 x USB Cable 1 x eVic-VT Skin 1 x Wall Adapter (1A) Joyetech enters the temperature control market with the eVic-VT. Presenting the eVic-VT 60W, its new cutting edge technology of temperature control. The eVic-VT can fire up to 60 watts perfect for people chasing that perfect taste and vapor production. This sleek looking device is sure to stand out among the crowd with it's eye catching and colorful design. The Joytech eVic-VT features a super large OLED screen, supporting VT-Ti (Titanium)/ VT-Ni (Nickel)/ VW mode, and huge battery capacity of 5000mah. The Variable Temperature (VT) system provides an almost perfect vaping experience with various e-juice through the temperature control system, and at the same time, it decreases e-juice consumption. Also, it is economical in battery consumption. When vaping, the wattage will reach to maximum in no time and...
Mods
JoyeTech Ego One XL 2200mah Kit - Non EU only!Joye eGo ONE Starter Kit Petite yet powerful, the eGo ONE is the One device for everyone. The eGo ONE is petite in appearance, as long as a real cigarette, but is powerful enough to produce a cloud. The eGo ONE is 510 threaded and has a adjustable airflow valve. Rotate the ring on the atomizer base clockwise to decrease the air inflow, and counter clockwise to enlarge the air inflow. The eGo One kit has two drip tips included, a metal and glass version with thermal insulation. The Ego One stands out from different kinds of e-cig products by using two types of changeable atomizer head to cater for different vaping methods. eGo ONE CL 1.0ohm is especially suitable for mouth inhale. It mimics the feeling of taking a puff of a real cigarette. With its tighter draw, it is perfect for people who want the sensation of a real cigarette. eGo ONE CL 0.5ohm The sub ohm coil can easily create huge vapor production. With its loose draw, it is perfect for any cloud chas...
JoyeTech
JoyeTech Evic Supreme in Stock!Please use UPS courier at the checkout for all international orders, and Fastway courier for all orders within Ireland. The eVic supreme is the new generation of intelligent powerful product. It not only inherits all the best features from Joyetech eVic, but also is endowed with its own characteristics. Upload and view pictures on the OLED display screen (adopts 0.96 -inch, 64 x 128 pixels) and 16 grade gray function which can show the photos clearly on the device. You can upload the pictures as you like through myVapors. Then the picture will be shown on eVic supreme. myVapors With the new myVapors software, eVic supreme makes the interesting things more entertaining. Brand-new structure design eVic supreme battery adopts brand-new structure design & changeable atomizer connecting rings which improve the strength and the reliability. The battery tube, battery bottom cap, direction key and connect cover are all stainless steel. Screen saver You can use the de...
JoyeTech
Joyetech eVic Easy HeadThe latest Joyetech eVic control head allows you to vape in unregulated and regulated mode. Regulated mode is the 3.3v constant voltage whilst unregulated is whatever is available from the battery (fully charged 18650 may be at 4.2v and it works down until the battery is depleted). The Easy Head is completely cylindrical with air channels at the top. It provides a wide and ample eGo well that can receive most eGo threaded clearos or cartos including the Kanger ProTank etc. The Easy Head can be used with the new eVic ECA Changeable Atomizer tanks for a completely streamlined look. The Easy Head has a side micro USB port for charging. You can use the eVic charging cable or any micro to regular USB cable to charge your Easy Head on your computer port with the battery installed. You can also use your Easy Head while the unit is charging as a pass through. There is a small circular led below the charging port that lights red while charging and green when fully charged. The Easy Head is n...
JoyeTech
Joyetech ECA Tank cartridgesGenuine Joyetech 3.5ml tank cartridges for use with the ECA atomizer.
