Eleaf iJust NexGen Full Kit - 3000mAh
The iJust NexGen is a new all-in-one style by Eleaf , skilfully packing a built-in 3000mAh battery with a 2ml tank in a tube-like unit. With a single button to operate it, the iJust NexGen comes across as an ordinary easy-to-use kit, but there is so much more to it than that. Not only does it come with the HW coils that are designed for ultimate flavor, it is also features the retractable top filling system. Also with intuitive four color LEDs, you can easily check the battery status with a simple glance at the color of the light. 6 colors. Parameters Diameter: 25mm Height: 118mm E-liquid capacity: 2ml Battery capacity: 3000mAh Output wattage: max 50W Resistance range: 0.15ohm - 3ohm It comes with 1 x iJust NexGen 2 x HW1 0.2ohm Head 1 x User manual 1 x USB cable Spare Parts Features: Convenient Retractable Top Filling System HW Coils for Big Clouds and Optimal Flavor Intuitive 4 Color LEDs Revealing Battery Level All-in-one Design with Interna...
Buy more, pay less
from eachThe iJust NexGen is a new all-in-one style by Eleaf, skilfully packing a built-in 3000mAh battery with a 2ml tank in a tube-like unit. With a single button to operate it, the iJust NexGen comes across as an ordinary easy-to-use kit, but there is so much more to it than that. Not only does it come with the HW coils that are designed for ultimate flavor, it is also features the retractable top filling system. Also with intuitive four color LEDs, you can easily check the battery status with a simple glance at the color of the light. 6 colors.
Parameters
Diameter: 25mm
Height: 118mm
E-liquid capacity: 2ml
Battery capacity: 3000mAh
Output wattage: max 50W
Resistance range: 0.15ohm - 3ohm
It comes with
- 1 x iJust NexGen
- 2 x HW1 0.2ohm Head
- 1 x User manual
- 1 x USB cable
- Spare Parts
Features:
Convenient Retractable Top Filling System
HW Coils for Big Clouds and Optimal Flavor
Intuitive 4 Color LEDs Revealing Battery Level
All-in-one Design with Internal 3000mAh Battery
Guide:
Assembling:
1. First drip a few drops of e-liquid directly into the coil to make it fully saturated before first use.
2. Then screw the primed coil onto the atomizer base tightly.
3. Put glass tube, top cap and mouthpiece on.
4. Slide the mouthpiece back to reveal the fill port, slowly fill e-juice into the tank through the port, and then close the retractable top after filling.
5. The airflow can be adjusted by turning the airflow control ring on the atomizer base.
6. Finally the iJust NexGen is ready for use.
Power on/off:Press the button 5 times in quick succession within 2 seconds, and the indicator light flashes 5 times to show the device is powered on. In the same way, it can also be turned off.
Vaping: Keep holding the button when the device is powered on.
Protections: 15s cut off, short circuit protection, low voltage protection, resistance detect
| Title | Eleaf iJust NexGen Full Kit - 3000mAh |
|---|---|
| Category | Eleaf |
| SKU | Eleaf-NexGen |
| Condition | new |
| Weight | 290.0 g |